Correct installation methods of Switch socket

Berise System Integration Co., Ltd. company specialized remind: wall switch socket installation is unreasonable, can cause potential safety hazard, generally has the following several improper installation.
1. zero, phase wire wrong.
2. do not tally with the socket power working voltage and current, overload for a long time.
3. on a pile head pick up the two wires.
4. switch is installed on the flammable objects, wire core exposed or water vapor infiltration, caused by short circuit, so such as toilet switch socket must be equipped with waterproof boxes.
When installing switch socket, how to correctly installed, Berise System will introduce to you as follows:
1. Make sure all wires installed fully contact with the switch, socket in the back seat wiring pile head. Eighth, opening and closing the switch in the opposite direction from the multi-purpose hand, right hand than in his left hand, generally is in the left door, the door switch to use fluorescent type.
2. To install, tighten the joint.
3. The computational load, calculate by 1000w socket without fixed load, ordinary socket used 2.5mm2 copper core.
4. Household appliances is rigorous with two hole socket, bath bully switch power is bigger, need to stay a place, often to plug appliances available switch socket.
5. The switch should be 130 ~ 150cm from the ground, 15 ~ 20cm distance from the door frame side, behind the door cannot be installed. Have a panel wall switch position from the top of the plate at least 0.2M above, with the height not less than 1.3M off the ground socket, install socket is not lower than 0.3M, hutch defends the other set. Do not install in the head of a bed or table, all the closing of the electrical switches direction should be consistent.
6. Three hole socket on the ground, left to the zero line, right next phase line; Two hole socket left after the zero line, right next in line.
Did you when installing a switch socket, pay attention to the right way to the above, if there is improper installation, must immediately a switch to oh! To ensure its own security is the most important thing.